Wheel Spacer Test Fitment Kit (1-31mm)

***Not for Road Use***

Test fit any wheel spacer thickness from 1mm to 31mm with this 3D Printed Wheel Spacer Test Fitment Kit.

This 6-piece kit includes the following thicknesses:

1mm, 2mm, 3mm, 5mm, and two 10mm spacers

These 6 spacers can be stacked in different combinations to make any thickness between 1mm to 31mm in 1mm increments.

Features:

• Two slot sizes to best fit 12mm, 1/2”, and 14mm wheel studs.

• Relief cuts on the backside for easy removal (for 5mm and thicker).

• 3D Printed using a Tough variant of PLA+ material with print settings that prioritize strength.

• These wheel spacers can support the weight of a vehicle, but driving with these 3D Printed spacers is NOT RECOMMENDED.

• Made in USA.

• Color: Grey

This kit is available in two sizes:

• 4-Lug (4×98-4×114.3)

• 5-Lug (5×100-5×130)

The 4-Lug (4×98-4×114.3) size fits the following bolt patterns with a center bore of 70mm or smaller:

• 4x98

• 4x100

• 4x101.6 (4x4”)

• 4x108 (4x4.25”)

• 4x110

• 4x114.3 (4x4.5”)

The 5-Lug (5×100-5×130) size fits the following bolt patterns with a center bore of 75mm or smaller:

• 5x100

• 5x101.6 (5x4”)

• 5x105

• 5x108 (5x4.25”)

• 5x110

• 5x112

• 5x114.3 (5x4.5”)

• 5x115

• 5x118

• 5x120

• 5x120.65 (5x4.75”)

• 5×127 (5×5”)

• 5×128

• 5×130

Note: These 3D Printed Wheel Spacers are intended for test fitting purposes only. Driving with 3D printed wheel spacers is NOT RECOMMENDED.

Installation Instructions