Mandrel Bend Tube Protractor

from $35.30

Use this Bend Protractor to measure out the angle of a cut on a mandrel bent tube. The Bend Protractor can be used as a standalone tool to measure out 5° increments, or it can be used as a jig in combination with a digital protractor (not included) for precision angle measurement.

  • Please select the desired tube Outer Diameter (OD) and Centerline Radius (CLR) to purchase.

  • The rotating Arm has hard stops at +/-90° to aid in marking the beginning and end of a bend.

  • Index features for marking tube centerlines at the 3, 6, 9, and 12 O’clock positions along the bend.

  • Graduated coarse 5° markings on the bend protractor body and arm. Inch markings on the straight tube sections.

  • Index features to aid in using supplemental digital or analog protractors for precision angle measurement.

  • The side of the Arm with degree markings is used for marking the cut. The opposite side of the arm has a ledge for supporting a supplemental protractor.

  • The pictures show some samples of this item in various sizes. The item colors are assorted and may vary from what is shown.

  • This item includes one protractor body and one arm in the selected size. The mandrel bent tube and supplemental protractors shown are for reference only and are not included.

  • This tool is 3D printed in the USA with print settings that prioritize strength.

  • Additional sizes that are not listed are available on request.

  • Quantity discounts available for sets of 3 or more. Please message for details.

  • Please allow up to five business days to ship.

Size:
Quantity:
Add To Cart

Use this Bend Protractor to measure out the angle of a cut on a mandrel bent tube. The Bend Protractor can be used as a standalone tool to measure out 5° increments, or it can be used as a jig in combination with a digital protractor (not included) for precision angle measurement.

  • Please select the desired tube Outer Diameter (OD) and Centerline Radius (CLR) to purchase.

  • The rotating Arm has hard stops at +/-90° to aid in marking the beginning and end of a bend.

  • Index features for marking tube centerlines at the 3, 6, 9, and 12 O’clock positions along the bend.

  • Graduated coarse 5° markings on the bend protractor body and arm. Inch markings on the straight tube sections.

  • Index features to aid in using supplemental digital or analog protractors for precision angle measurement.

  • The side of the Arm with degree markings is used for marking the cut. The opposite side of the arm has a ledge for supporting a supplemental protractor.

  • The pictures show some samples of this item in various sizes. The item colors are assorted and may vary from what is shown.

  • This item includes one protractor body and one arm in the selected size. The mandrel bent tube and supplemental protractors shown are for reference only and are not included.

  • This tool is 3D printed in the USA with print settings that prioritize strength.

  • Additional sizes that are not listed are available on request.

  • Quantity discounts available for sets of 3 or more. Please message for details.

  • Please allow up to five business days to ship.

Use this Bend Protractor to measure out the angle of a cut on a mandrel bent tube. The Bend Protractor can be used as a standalone tool to measure out 5° increments, or it can be used as a jig in combination with a digital protractor (not included) for precision angle measurement.

  • Please select the desired tube Outer Diameter (OD) and Centerline Radius (CLR) to purchase.

  • The rotating Arm has hard stops at +/-90° to aid in marking the beginning and end of a bend.

  • Index features for marking tube centerlines at the 3, 6, 9, and 12 O’clock positions along the bend.

  • Graduated coarse 5° markings on the bend protractor body and arm. Inch markings on the straight tube sections.

  • Index features to aid in using supplemental digital or analog protractors for precision angle measurement.

  • The side of the Arm with degree markings is used for marking the cut. The opposite side of the arm has a ledge for supporting a supplemental protractor.

  • The pictures show some samples of this item in various sizes. The item colors are assorted and may vary from what is shown.

  • This item includes one protractor body and one arm in the selected size. The mandrel bent tube and supplemental protractors shown are for reference only and are not included.

  • This tool is 3D printed in the USA with print settings that prioritize strength.

  • Additional sizes that are not listed are available on request.

  • Quantity discounts available for sets of 3 or more. Please message for details.

  • Please allow up to five business days to ship.